TiVo Slide

Contents 1 Overview 2 Prerequisites 2.1 Hardware: 2.2 Software: 2.3 Configuration: 3 Step by step walkthrough: 3.1 Disable Bluetooth 3.2 Pair Remote and Dongle 3.3 Test with evtest 3.4 Re-map Problem Keys 3.5 Assign Keys To XBMC Functions 3.6 Configure the IR keys 4 Issues: 4.1 Non-functional Keys 4.2 Skin Problems

1 Overview

The Tivo Slide is a wonderful remote control featuring:

• Slide-out QWERTY keyboard
• Backlit keys
• RF (bluetooth) operation for most keys
• Ability to program some keys (Volume/Power) to use IR

There is a lot of discussion regarding this remote on the XBMC Forums.

2 Prerequisites

2.1 Hardware:

• Tivo Slide remote with supplied dongle

2.2 Software:

• XBMCbuntu Eden 11.0

2.3 Configuration:

There are two modes of operation for this remote

• USB HID Emulation [Recommended]

The dongle presents itself to the computer as a USB keyboard. It uses bluetooth to communicate with the remote, but does not expose bluetooth to the computer in any way - it is just a USB keyboard.

• Bluetooth Device [Not Recommended]

The dongle presents itself to the computer as a bluetooth adapter. Through this adapter, you can connect to the remote as a bluetooth keyboard. This setup has been problematic, and therefore is not described here.

Configuring which mode is a bit of a mystery. Simply plugging into a XBMCbuntu 11.0 machine seems to put the dongle into bluetooth adapter mode. In order to force it into USB HID Emulation mode, you need to completely disable bluetooth on the computer, as described below.

3 Step by step walkthrough:

3.1 Disable Bluetooth

Disabling bluetooth is necessary to force the dongle into USB HID Emulation mode. There may be another way to do that, but so far this is the only method discovered. From a command line, issue the following commands:

1. sudo apt-get remove bluez
2. sudo apt-get remove blueman
3. sudo echo -e "blacklist btusb\nblacklist bluetooth" > /etc/modprobe.d/blacklist-tivoslide.conf
4. sudo reboot -now

3.2 Pair Remote and Dongle

You can now pair the remote with the dongle as described in the manufacturer documentation

1. On the TiVo Slide remote, press and hold the TiVo button and the blue "B" button simultaneously until the activity indicator light blinks blue
2. On the dongle, press and hold the button until the LED starts blinking
3. After a few seconds, the remote's activity light will blink rapidly 5 times and then go off if pairing is successful

3.3 Test with evtest

Optional - instructions need to be written!

3.4 Re-map Problem Keys

There are several reasons why you need to re-map keys on the Tivo Slide remote. First, due to a limitation of X.org no keycodes with values larger than 255 can be used. There are several such keys on this remote. Therefore they need to get re-mapped from large keycodes (>255) into smaller ones so that applications like XBMC can use them. Second, you may want to re-map some keys to do something more useful than their default. The proper way to re-map your keys is using the Linux udev system. To do this:

• Create this file: /etc/udev/keymaps/tivo-slide

0xC0041 0x1C #SELECT
             0xC00F5 0X3F #SLOW
             0xC0083 0x1C #ENTER
             0xC006D 0X40 #ZOOM
             0xC008D 0X42 #GUIDE
             0xC009C 0x41 #CHUP
             0xC009D 0x6D #CHDN
             0xC006C 0x1D #A
             0xC006B 0x3C #B
             0xC0069 0X3D #C
             0xC006A 0X3E #D
             0xC00B6 0X0E #RETURN

• Add this line to the file: /etc/udev/rules.d/10-local.rules

SUBSYSTEM=="input", SUBSYSTEMS=="usb", ATTRS{product}=="BCM2070B0", RUN+="/lib/udev/keymap $name /etc/udev/keymaps/tivo-slide"

3.5 Assign Keys To XBMC Functions

Optional step, not yet described. Hint - keyboard.xml

3.6 Configure the IR keys

Some of the keys can be programmed to send IR commands instead of bluetooth. See the following resources for more information:

• Tivo instructions for IR code search
• Tivo instructions for IR learning

4 Issues:

4.1 Non-functional Keys

There are four keys that currently do not work. They require a Linux kernel patch to get functional - instructions on doing that are not yet available. The four keys are:

• Thumbs Up
• Thumbs Down
• Tivo
• Live TV

4.2 Skin Problems

The Tivo remotes are designed for use with the Tivo user interface, which is not very similar to any known XBMC Skin. This leads to some strange inconsistencies. For example:

• Tivo has no "Stop" button, and therefore neither does it's remote. If I remember correctly, on a Tivo you hit "Left" to exit a playing video.
• Tivo has no "Menu" button (which XBMC uses to bring up the Context Menu)
• Tivo has a "slow motion" button, but XBMC doesn't support slo-mo.

Hopefully, someone will design a Tivo-like skin for XBMC!